Tile robe
Product name : Tile tile
Deco Grout - Cementous tile grout
Product Description:
Decorete Cement Tile Grouting Powder is a ready-to-use colored polymer modified cement for defining tile joints.
Uses:
Tile grout is used as a joint filler for tile joints, to adhere it perfectly with the matching decor color.
Advantages :
- Tile grout is ready to use.
- High bonding strength.
- Resistant to the growth of fungi and algae.
- A variety of colors available.
Mixture :
7 liters of potable water per 25 kg bag of Deco Grout SP Slowly add the powder to the water using a slow speed mixing auger fitted with a mixing paddle, until a homogeneous consistency of the mixture is achieved.
Application method:
Moisten the tiles slightly with a clean, damp sponge before tiling.
Spread the mixture on the surface of the tiles using a rubber putty knife. Do this back and forth at a 45 degree angle to the tile surface to ensure the joints are completely filled.
Remove excess mixture by holding the rubber putty knife at a 90-degree angle running diagonally across the tile.
After 15-30 minutes, wipe away the remaining excess with a wet sponge until the tiling is smooth and uniform.
Packing:
25 kg bags.
Coverage:
|
Tile size (Centimeter) |
1 mm |
2 mm |
3 mm |
4 mm |
5 mm |
6 mm |
|
10 |
1.5 |
1 |
0.7 |
0.5 |
0.45 |
0.35 |
|
20 |
3 |
2.2 |
1.5 |
1.25 |
1 |
0.8 |
|
25 |
3.5 |
2.5 |
1.8 |
1.5 |
1.2 |
0.9 |
|
20 |
4 |
3 |
2.2 |
1.8 |
1.5 |
1 |
|
30 |
5 |
4 |
3 |
2 |
1.7 |
1.5 |
|
30 |
6.5 |
5 |
3.5 |
2.5 |
2 |
1.75 |
|
40 |
8 |
6 |
4 |
3 |
2.5 |
2 |
|
50 |
10 |
8 |
6 |
4 |
3 |
2 |
expiry:
Unopened bags can be stored for up to 12 months in a cool, dry, weatherproof environment. Bags should be stored off the ground.
Cleaning:
Remove excess adhesive with a damp cloth before the material sets.
Contraindications for use:
- Do not install control or expansion joints.
- Color development may vary depending on tile type, temperature, humidity and cleaning methods.
- Decorete recommends Deco Bond 550 Mixed with water for outdoor applications subject to thawing conditions.
- Product technical specifications:
- Hardening time/viscosity: 1 hour at 25°C
- Preparation time: Initial layer from 1 to 3 hours
- The final layer is 3 to 8 hours
- Compressive strength: 15 MPa in 28 days
- Adhesion strength: 2.5 MPa in 28 days
safety precautions:
This product is non-toxic but contains cement. Use good occupational health and safety practices to avoid direct contact.
Decorete recommends using dust masks, eye protection and wearing gloves when handling this product.
To communicate:
For more information on this product or advice on application, please contact our Technical Consulting Department.
Warranty (Disclaimer):
@Decorete fully warrants its products when used and applied in strict accordance with printed instructions for mixing and applying the product. In any event, Decorete ®'s liability shall not exceed either the refund of the purchase price, or the replacement of the product purchased.
keep away from the reach of the children
