Gasoline water pump - installation and use
The gasoline water pump is distinguished by its ease of transport from one place to another, its multiple uses, and the possibility of using it in areas where there is no electricity. So we recommend it to you and today we present to you how to install it step by step.
How to install and use:
Included with each pump are piston connectors + 3 mounting bolts:
1- A plastic spiral-type seal is attached to the 2" suction pump opening, and the clamp is placed to ensure that the seal does not loosen due to water pressure.
2- A linen-type seal is attached to the 2" impeller pump opening, and the clamp is placed to ensure that the seal does not loosen due to water pressure.
3- The pump is filled with oil
4- The pump is filled with gasoline
5- The pump is now ready for operation via the filling rope
6- The rope is pulled out several times until the gasoline reaches the engine and it begins to rotate
| Buy a pump now and install it yourself |
The following points should be paid attention to before operation:
1- The pump comes from the factory without oil or gasoline
2- The type of oil must be 40 gauge
3- The type of fuel is unleaded automobile gasoline
4- The length of the tow bar must be not less than 3 meters and not more than 8 metres
5- The length of the payment bar must be 25 meters or less
اترك تعليق او سؤال