Electronic controller for the water pump/automatic
The electronic controller in the water pump , or what is known as the automatic, is a device that is installed on the pump. Its importance lies in that it protects the pump from malfunctioning and burning in the event that there is no water in the tank or well, and it performs the function of turning the pump on and off automatically.
Uses:
There are two main uses for a home water pump:
1- Transferring water from the tank or well at the bottom to the upper tank of the house: A float must be available in the upper tank. When the pump is turned on, water rushes from the pump to the upper tank through the automatic device and pipes to pour into the tank. When the upper tank is full, the floating ball blocks the valve. Thus preventing the flow of water, the pressure in the pipes increases, and the automatic device senses this pressure and disconnects the pump automatically. If the water in the upper tank decreases, the floating ball descends and releases the valve, so the water flows and the pressure in the pipes decreases, so the automatic device starts the pump. If there is no water in the lower tank or well, the pump automatically disconnects the pump to protect it from burning.
| Learn about the best types of water pumps we have available |
2- Increase the pressure in the home water network by installing it on the upper tank: The pump is used to increase the pressure in the water network, and here the pump and the automatic are installed on the upper tank so that the pump suctions water from the upper tank and distributes it in the house’s water network via the automatic device. And the pipes. If all the faucets in the house are closed, water will be trapped in the pipes, and therefore the automatic machine turns off the pump. When a tap is opened in the house, the pressure is released, and here the automatic device turns on the pump to pump water through the network.
التعليقات
اترك تعليق او سؤال