What is the appropriate pump to strengthen the water network or shower water in your home?

One of the most important problems facing many residential apartments is the water pressure in the network, especially the shower water, especially the closer the apartment is to the tanks, meaning that apartments on the upper floors suffer more than apartments on the lower floors.

Therefore, an ideal solution is to place a water pump to increase the pressure with a pump regulating device on the roof to regulate the pump’s operation when the water is turned on and stop when it is closed.

But the most common question is, what is the right pump to do the job?

Many people are confused when buying the appropriate pump. What is required here is to choose a pump that gives the appropriate pressure (approximately 2.5 bar) and no more than that, because any increase in pressure affects the water network and leads to the water lines bursting, even after a while.

The next question is, how can you estimate the pump pressure before purchasing it?

To calculate the value of the pressure generated by the pump, read on the information panel the highest height reached by the pump, Hmax , and then divide it by 10, and the answer is the value of the pressure expected to be obtained.

For example, if the Hmax of the pump is 22.5 m, the expected pressure is 2.25 bar.