How do you install a bidet or bathroom sprayer?

How do you install a bidet or bathroom sprayer?

One of the biggest problems facing people who travel to study or stay for long-term periods, especially in European countries and America, is the lack of a bidet or sprayer in the bathroom, as is known in most Arab and Muslim countries, knowing that you can carry the solution in your bag and install it there, all that is You need some simple tools:

* Required tools : –
• Rinser or sprayer
• Double angle valve
• Teflon
• Wrench ( English pipe wrench or any alternative thereto)

.
* Installing the bidet or sprayer .
- There is usually a water valve connecting the water source to the toilet bowl. Unscrew it from the side of the wall, but close the valve before removing it so that water does not spread everywhere.

- Get the double angle valve and install it in place of the fastener that you removed, and do not forget to put Teflon on the teeth area (the amount of Teflon should be moderate, neither too little nor too much, approximately 5-7 turns of Teflon), tighten it using the wrench.

- After completion, there will be two outlets, one for connecting the hose of the box and the other for connecting the hose of the bidet or the sprayer, knowing that the ends of the hose do not need Teflon because it has a piece of leather, and then tighten them with a wrench.

- After finishing, open the valve coming out of the wall, and then the double valve that you added.

- If there is a water leak, tighten the area where the leak is, and if the leak continues, remove it and add another amount of Teflon to it.

You can browse all plumbing equipment and supplies here