5 ways to fix a fan that does not spin without calling a repairman and tips for taking care of it

You don't need to call in a handyman to make repairs, this device does.

In addition to saving time, improving the fan that does not rotate on itself can also save expenses.

Therefore, it is very important for us to know this information.

Do you have a similar problem?

Come on, let's take a look at a complete review of 5 ways to fix a fan that won't spin and the following maintenance tips.

5 ways to fix the fan not rotating

1. Remove the fan housing

The first thing you should do is turn off the fan and remove the cover.

The propeller itself generally consists of several frames, a propeller guard and a cover for the motor or dynamo at the back.

You need to remove both parts to fix the fan.

2. Check the dynamo cover

After removing the fan guard and dynamo, you need to check the dynamo section because this is where the motor and fan actuator work.

Perform this inspection carefully because there are some parts such as the stator and motor shafts that are easily damaged.

3. Check the bearing or bushing

Generally, fan damage is caused by non-rotation due to the bearing or bushing not working optimally.

These two components are located on the propeller dynamo motor.

Check the dynamo motor, to see if there is wear on Bushings .

You can do this by looking with your eyes or by inserting the motor hub into the bearing/bushing and then shaking it right and left.

If it's loose that means The bushings are worn out.

Leave Bushings then replace it with new ones.

Then reinstall Bushings to the dynamo engine.

4. Clean from dust and dirt

After repairing the dynamo engine parts, bearings and bushings, all dynamo engine parts must also be cleaned of dust and dirt .

Dust and dirt stuck to the fan motor will likely damage the fan's function in the short and long term.

So make sure the fan is clean and tidy.

5. Reinstall the fan

After cleaning the motor, a fan and motor guard should be installed at the back so the fan looks new as usual.

Easy, right, how to fix this non-rotating fan?

Even though it is working normally again, there are fan care tips that are equally important for you to know.

Fan care tips to keep it durable

There are 5 fan care tips in order for it to remain durable and rarely damaged that you need to know.

1. Clean the fan carefully.

2. Avoid using a rough fan.

3. Do not expose to water.

Because water can damage the engine, especially the fan dynamo.

4. Make sure the cable is in good condition.

5. Avoid continuous use.

Give it a break for a few hours after a long period of use, so that the fan motor does not overheat.

Well, these are 5 ways to fix a fan that does not spin and tips to care for it that you can know.

Hopefully it is useful and you can do it at home, yes!