4 ways to paint leaking walls

Most often the damage occurs on the walls of a house or apartment. One of them is water stains or water stains .

Water causes water spots, and this is usually caused by different things, and the reasons are not the same.

If the wall of your house is connected to the wall of the neighbor's house, this is guaranteed.

Maybe the neighbors do not plaster the walls of the house so that when there is water, it seeps into the walls of your house.

Or it may be because there are cracked gutters, the walls are not waterproof, and many other reasons.

All this can happen after a while, so there is no need to panic or worry, as this is common.

How to paint walls used waterproofing

1. Make repairs in leaking areas.

Make repairs to the leaking part of the building. This water stain is caused by a leaky drain or gutter so water seeps into the wall.

This part is the first part to be repaired so that the leaking part does not continue to leak and damage the wall.

2. Peel off the damaged paint layer

Scrape the damaged paint layer down to the wall surface. This is done before repainting.

This must be done so that there is no old layer of paint that looks ugly and must be removed immediately.

3. Repair the wall

Wall repair using cement filler . This is done to eliminate hair cracks and small cracks in the walls.

Of course, so that this leak does not expand. In addition, it prevents leakage from occurring again.

4. Repainting

Draw some drawing. After making repairs with cement filler , apply primer.

The last thing to do is paint finishes where there is a water spot. Well, now there are no more water stains on the walls of the house.

Well, this is how you paint the walls for previous waterproofing. You no longer have to worry about the house looking less than good.