What is a kerosene greenhouse and how do you maintain it?

A kerosene or kerosene greenhouse or heater is an excellent and cheap way to heat a place. But its frequent use may lead to many problems and malfunctions.

In this guide presented by Jaafar Shop , we will explain the most important malfunctions of kerosene greenhouses and how to fix them yourself.

But before moving on to the malfunctions and how to fix them, let us learn more about the kerosene greenhouse.

• What is the principle on which a kerosene greenhouse operates?

A kerosene greenhouse is simply a kerosene heater. The heater absorbs the kerosene in its tank through a cotton wick and burns it with an electronic igniter or external ignition.

The burning of the wick leads to the heating of certain metal coils that heat the air in the place. The burning force is controlled by a manual handle that lowers and raises the cotton wick.

• What are the faults in a kerosene greenhouse and how do you fix them yourself?

1. The greenhouse does not work (it does not burn):

The greenhouse wick is one of its most important parts, so it must be cleaned and changed every once in a while. If the wick is intact, check the kerosene level in the greenhouse tank by reading the electronic indicator or removing the tank cap and looking with the naked eye. If the fuel level is low, fill the tank.

In some greenhouses, there is a battery-powered burner. If you press the igniter and no spark or flame develops, the battery may need to be replaced. If you find that the igniter does not work after replacing the battery, replace the igniter itself.

2. The problem of the smell of kerosene and smoke:

Sometimes a kerosene stove emits a pungent smell when the wick starts burning, and other times it emits thick black smoke. To solve these problems, follow these steps:

a. Move the greenhouse to a place where there is no draft. Do not close the doors and maintain the renewal of oxygen in the room, but only change the location of the greenhouse away from the air passages.

B. If the wick flame is high, lower the cotton wick by the handle. A high wick may cause thick black smoke, so try to adjust the wick until the black smoke disappears.

C. A strong odor may result from the metal head not being properly adjusted to the base. Make sure the coil head is seated correctly on its base.

Dr.. Make sure that the quality of kerosene used in the greenhouse is high. Low-quality kerosene may cause the greenhouse wick to burn poorly and produce an unpleasant odor.

3. The problem of the greenhouse wick not rising:

Make sure the greenhouse wick high and low knob is working properly. The handle may need to be replaced. All you will need is a screwdriver to remove the handle and replace it with another of the same type.

If the problem is not with the handle, make sure the cotton wick is properly fitted over the base. The wick should be sitting symmetrically and evenly. Pull the ends of the wick and move them left and right to make sure the vertical and horizontal position is correct.

a. The flame may take too long to burn. Make sure the wick is clean. If the filament is very old, replace it.

B. Sometimes the fuse in the greenhouse does not lower and therefore the greenhouse does not turn off. The reason for this may be that the wick is not adjusted properly as the wick is set too high. The cause may also be tar buildup on the front of the wick. Lower the wick manually after screwing the handle and then extinguish the flame using a wet rag. Place the wick back on the greenhouse, but tightly this time.

This guide is presented by Jaafar Shop, where you can browse the latest and most popular kerosene greenhouses here .