How do I get rid of gaps using foam?

Insulation foam is one of the most important tools that should always be available in your home, as it helps you close existing gaps easily and quickly. It also helps you keep the house clean and warm. So, what tools do you need, and how do you use foam?

Tools and supplies you need:

1- Brush

2- Gloves

3- Insulation foam package

4- Saw

5- Wall sanding

How to use:

1- Cleanliness is the first thing to think about when using insulation foam, so you must first organize the area using a brush and make sure that there are no stones or dirt.

2- Spray the area to be sealed with insulating foam with a little water. Foam needs moisture to spread and freeze.

3- Wear gloves, as they are necessary to protect you from skin irritation. Read the instructions written on the back of the insulating foam box carefully and carefully.

4- Open the cover, you will find a penis with a nozzle like the one here . You must place the penis securely, then shake the insulating foam can quietly for 15 seconds.

5- Now it is time to apply it, to get strong results. You should hold the foam can in reverse. Where the nozzle of the foam gun is at the bottom

.

You can watch this video which explains how to use it.

6- Apply a small amount using the foam gun and lightly press the trigger. Try to apply an equal amount and be sure to fill the gap completely.

7- When finished, spray water again and moisten the insulating foam. If you apply more than one layer of foam, you must spray water over each layer.

8- Leave the foam to dry, knowing that, according to the manufacturer, it takes one hour to dry.

9- After ensuring that the foam is dry, cut off the excess using a saw like this .

10- Then, to get a beautiful, coordinated and smooth look, use wallpaper, which you can buy through the Jaafar.com website.