How to calculate the gypsum ceiling needs of a house

How to calculate the need for gypsum ceilings in the house must be done accurately. Calculating total materials and unit cost requires a special formula.

The roof portion of a house is also known as the roof. The roof itself is an important element of the building.

Therefore, if you plan to build a house, you should make an accurate calculation of the roof.

There are several types of ceilings, including gypsum. The attractive appearance of gypsum makes some choose it.

The important role of the ceiling as a barrier between the ceiling and the room in addition to providing aesthetic value.

Hence, you should carefully consider the amount of costs required.

Well, so that you have an idea of ​​how to calculate the needs of the correct gypsum ceiling, here is the description.

How to calculate gypsum ceiling needs

The roof is one of the elements of building a house. Installation must also be considered from the beginning of the materials to the budgeted cost.

1. Prepare all materials or materials

To install a roof in the house, you first need to prepare materials or materials.

Gypsum ceiling installation must still use the ceiling frame.

The ceiling frame used is usually hollow iron for gypsum studs.

After that, you can start calculating the requirements for the required materials, not just gypsum.

This time, an example of calculating gypsum ceilings with a room area of ​​4 x 5 m = 20 m2 will be discussed.

So what's the next account?

2. How to calculate the need for a hollow iron frame

To be able to know how to calculate the need for gypsum ceilings, there are several steps to take, including how to calculate the need for a hollow gypsum ceiling.

The frame for installing the gypsum ceiling must also be prepared. Below is a calculation of how to install a hollow iron frame with the above room size.

The hollow iron frame is selected as the material with a length of 60cm for the longitudinal size. Then the cross section is installed 3 middle rows.

Thus, the calculation becomes as follows.

For wall supports = (4 + 5) x 2 = 18 square meters Number of frames per 60 cm = (5 / 0.6) = 8 rows. Length = 8 x 4m = 32 square metres.

Amount to cross a hollow frame: 4 x 4 cm = 3 x 5 m = 15 square metres

So, the total need for hollow iron frame for roof is 18 + 32 + 15 = 65 m.

With a length of 4 meters for each hollow iron rod, a hollow frame is required: 65/4 = 16.25 = 17 hollow rods.

3. How to calculate gypsum slate needs

For a 4 x 5 m ceiling there is a list of plasterboard required with a total length of (4 + 5) x 2 = 18 square metres.

Therefore, for the size of the gypsum ceiling, a slate of 18 square meters is needed.

4. How to calculate the size of gypsum ceiling

With everything taken into consideration, now is the time to get into how to calculate the need for gypsum ceilings.

The calculation method is easy, just look at the standard size of gypsum ceiling which is 1.2 x 1.4 m.

In this way, you know that the area of ​​one gypsum board is 2.88 square meters.

If the area of ​​the room in which you will install the gypsum ceiling is 20 square meters and has an area of ​​4 x 5, what is the need for a gypsum ceiling board?

In order to perfectly cover the roof of the house, the calculation is made as follows.

Plywood requirement = Roof size: Area per sheet + 5% safety factor

Requirements = 20 meters: 2.88 meters = 6.94 board panels.

Then calculate the following safety factor.

Wisdom = 5% x 7 sheets = 0.35 sheets.

Then it is calculated:

Total plywood/gypsum requirement = 6.94 sheets + 0.35 pcs = 7.29 sheets Approximately up to 8 pcs of boards.

Thus you can prepare a budget for gypsum ceiling installation with the above material requirements.