Domestic water pumps
The home water pump is described as the beating heart of the home water network system. In this article, three cases will be explained in which you need to install a water pump, whether for lifting or to increase pressure in the water network, and we will give you, dear reader, the appropriate pump for each case.
- In the case of lifting from the bottom of the house to the roof to fill one or more tanks with a capacity not exceeding 4 cubic meters, it is preferable to install a half-horsepower pump with a thin bed , so that it can fill a tank with a capacity of 2 cubic meters, for example, in a time not exceeding 60 minutes and with a lifting distance of about 36 meters. .
- In the case of lifting from the bottom of the house to the roof to fill one or more tanks with a capacity of up to 12 cubic metres, it is preferable to install a one-horsepower pump with a wide bed , so that it can fill a tank with a capacity of 2 cubic metres, for example, in a time not exceeding 20 minutes and with a lifting distance of about 33 metres. .
| Buy a water pump now |
- If you want to increase the pressure of the water network in your home to obtain strong water pressure in the home faucets or the keel without causing any damage to the home network due to the pressure, the ideal solution for this case is to install a pump on the roof with a capacity of half a horsepower and a wide bed, as it gives sufficient pressure to strengthen the water in the network. At the same time, this pressure does not cause any harm to the network.
التعليقات
اترك تعليق او سؤال