How to fix a leaking washing machine, it can be done from home easily!

If your washing machine happens to break down, then knowing how to fix a leaking washing machine seems essential for your cleaning needs.

It is not rare for washing machine damage to be caused by various factors, both technical and non-technical.

The damage is not only due to the age factor, but can also be caused by daily use.

Meanwhile, the leakage will have such a big impact that the machine will not work optimally.

So, what is an easy way to fix a home washing machine? Check out the discussion together!

Causes of washing machine leaks

There are many leakage factors that you need to know from different aspects of the home washing machine which greatly affect the productivity of laundry.

Check out some causes of washing machine leaks as a help on how to fix a leaking washing machine.

1. Leakage in the front of the washing machine

Leakage in a top load washing machine is caused by a clogged or tilted tub.

The cause of a clogged washing machine may be excessive foam resulting from using a large amount of detergent or improper mixing of clothes.

To test whether you are using too much detergent, take some freshly washed clothing, such as a small towel, and place it in a bowl before drying.

Other contributing factors can also be caused by overloading or imbalance by reducing the load, watch out for leaks.

2. Leakage behind the washing machine

How to Fix a Leaking Washing Machine It could also be caused by a leak at the back of the washing machine.

The step you can take is to remove the hose and then you will find a plastic blockage that needs to be removed and disposed of.

In addition, leakage is also caused by the drain hose not being properly connected to the drain pipe. Make sure the hose is fully inserted into the drain pipe.

If there is still a leak, the drain tube in your washer cycle may be clogged.

The leak at the back of the washing machine is caused by a loose connection in the feed hose.

Turn off the water supply and remove the hose to ensure that the washing machine is in normal condition.

3. Leaking at the bottom of the washing machine

If there is a leak under the washing machine, this indicates a hole in the water pump that must be replaced to prevent water from falling directly into the motor.

How to fix a leaking washing machine

In this case, there are several steps that you need to know as a way to fix the washing machine leak completely easily through the following steps.

1. Check the rubber parts of the washing machine

You can fix a leaking washing machine by checking the rubber that holds water in the drain.

The rubber function is used to prevent water from being lost, and opens to release water when turning.

The reason is that rubber is one of the main causes of leakage in washing machines which cannot absorb water to the maximum extent, so it leaks.

The rubber is located in the washing machine drain, so to inspect it, you first need to open the washing machine from the back.

If the rubber is still in good condition, another thing you should know is to make sure that there is nothing blocking the drains such as coins, paper, or other things.

These items are sure to be carried away when washing clothes and accidentally fall out and become clogged.

2. Replace leaky washing machine hose

A leaking washing machine can also be caused by a leaking hose and hose, so it must be repaired properly.

The washing machine is leaking due to a torn hose, so residual water can appear under the washing machine.

The best thing you can do is to replace the washer hose by opening the back.

Moreover, you can remove the connection place between the hose and the drain of the washing machine if there is a cable, and then just cut it.

Next, you connect a new hose by pressing while rotating the hose onto the pipe and then tightening the cable ties so water doesn't leak.

In the absence of cable ties, they can be replaced with wires.

3. How to fix a washing machine leak caused by a dynamo

In addition to hoses and rubber, the cause of leakage in the washing machine is also related to the engine dynamo and gearbox, so they are unable to hold water.

Damage to the gearbox can be seen by the amount of water that wets the gearbox and this is very dangerous.

In this case, it is expected that you will be able to replace with a new gearbox, but it is good to know how to fix a leaking washing machine by opening it as follows:

1. Turn the washer so that the bottom of the washer is to the side, followed by loosening all the screws securing the washer.

2. Open the bottom of the washing machine so you can see the gearbox

3. The gear box is with screws, so you need to open it first

4. Next, unscrew the screw attached to the tube

5. Remove the gearbox and replace it with a new one

6. Return all parts to the washer, don't miss anything