Easy ways to cut glass with nails for beginners

After we previously discussed about the steps of cutting glass in general, it is now time for us to know how to cut glass with nails that is easy for beginners.

This method may seem a little strange and unreasonable.

Because glass has strong properties, but it is easy to break because of its hard material.

While on the other hand, nails are common things that are attached to solid parts of the house such as walls.

But actually you can cut glass with just a nail, you know!

Let's take a look at the steps and how to cut glass with easy screws for beginners.

How to cut glass with nails for beginners

1. Preparing tools and materials

How to cut glass with nails, the first thing you need to do is prepare the tools and materials.

Some of the tools and materials to prepare are nails, glass, lubricant, pen-type glass cutters and a glass cutter .

After preparing the above equipment and materials, you can proceed to the next process.

2. Prepare the cutting mat

One of the things that should not be forgotten in the process of cutting glass is the cutting mat.

This will make it easier for you to cut later.

The rug you can use could be a large table or a flat surface board.

Next, place the glass or glass carefully so that it does not break.

You can use other materials such as carpet or similar as an alternative to the mattress.

3. Use lubricants

After everything is ready, you need to lubricate the glass with lubricant.

Several types of oil or fluids that you can use are kerosene, diesel or others.

This is to make the cutting process easier so that it is neater as desired.

4. Calculate the size of the glass required

Then, after smearing the glass with lubricant, you need to measure it as you wish.

You can use floss to make sure the cutting line is straight.

Then prepare the glass tongs so that they do not break or become damaged at the time of splitting.

5. The process of cutting glass with nails

Finally, after performing the above steps, you can now perform the glass cutting process.

Carefully split the glass, and make sure that before cutting the glass has been smeared with lubricating oil, so as to avoid messy glass breakage.

To avoid a skewed and messy splitting process, gently shake the pliers until the glass shatters.

This way, you will get a piece of glass that is straight and does not deviate from the pre-defined line.

6. Trim cuts if they are less than the maximum

If the cutting results are not perfect, you can arrange the results again.

You can also lubricate the part of the glass you want to arrange with oil to make cutting easier.

When you are finished, you can save the wound in a safe place and continue the glass cutting process again.

good luck!

Well, these are the steps and how to cut glass with nails that are easy for beginners to apply at home.

If you feel unsure, you can consult a more knowledgeable and experienced person.

We hope the above article adds insight and is useful to you!