Metallic pigment powder for epoxy

Product Name: Metallic pigment powder for epoxy

Pigment metallic - Metallic pigment-powder for epoxy applications

Product Description:

Special effect pigments consisting of nano-coated mica particles that create a unique-looking finish with a deep effect.

Mineral decorating pigments are designed to be mixed with clear epoxy resin products, creating a pearlescent finish with a dramatic color effect by overlapping and absorbing light.

Uses:

• Resin interior flooring.
• Epoxy products.
• Resin-based paints

Instructions for use

Using a clean mixing tool, mix Part A alone at low speed (300-450 rpm) for 2 minutes. Then add the dye to Part A. Using a clean mixing tool, mix for two minutes or more, until a homogeneous mixture is obtained. These premixing steps should be performed to minimize unwanted effects.

In a clean bowl free of any external particles and contaminants, combine Part A into Part B. Using a clean mixing tool, mix well for three minutes or more, until a completely homogeneous mixture is obtained.

Use a low speed drill type mixer (300-450 rpm) to reduce air/bubble entrainment in the product.

It is recommended to run the blender in reverse mode after the first 90 seconds so that the liquid is mixed from bottom to top.

Be sure to scrape the sides and bottom of the mixing container so that no unmixed material remains.

Only mix the amount of product required depending on the hardening time and working time required.

Consumption :

The recommended amount is about 10 g/L of resin.

However, consumption will vary according to the depth and tone of color required.

Technical data: