Cement-based putty - Deco Finish
Product name: Cement-based putty
Deco Finish 100 - Cement base putty
Product Description:
Decorate Wall Putty is a fine, white cement-based powder that provides an ideal base for concrete/cement plastered walls and ceilings.
Deco Finish provides a smooth finish to all types of paints and has water-resistant properties that prevent peeling and flaking of expensive paints.
Deco proves effective when working under time constraints, as it can be used even before the cement dries completely.
Ensures a perfect finish for bathroom, balcony walls and outdoor applications where moisture is available.
Uses:
Deco Finish is used to level smooth paint/plaster before applying paints.
Deco Finish is also used to seal cracks and holes in walls and ceilings before painting.
Deco Finish offers a variety of uses and can be used on concrete, painted walls, hollow blocks, precast walls, concrete ceilings, calcium silicate bricks, lightweight blocks, etc.
Advantages:
* Waterproof and therefore does not peel off due to moisture or minor leakage in the wall surface.
* It remains firmly adhered to the surface of the concrete covered wall and provides a solid base for expensive paint.
* Highlights the true color and shade of the expensive paint added to it.
* Provides protection and increases the beauty of the expensive paints used.
* It gives a smooth finishing touch and does not require a primer coat before applying the paint
- Excellent adhesion strength
How to use and apply:
Surface preparation: Cleaning the surface to remove particles, impurities, damaged or loose materials, dirt, grease, etc.
Cracks and holes must be filled and leveled. Wet the surface with clean water.
Mixture :
Mix one sachet of Deco Wall Putty with 6 liters of water to make a smooth, homogeneous paste. Let the mixture sit for 10 minutes, stir well and use the paste within 2 hours.
How to use and apply:
Apply Deco Finish putty using a putty knife, in layers up to 1 mm thick. Leave it to dry overnight before applying the second coat.
After drying, polish the surface with fine sandpaper and wipe off any resulting dust.
Use water for more hardness if necessary.
Packaging:
Plastic bags 15 kg
Coverage area:
Each bag is sufficient for an area of 14-15 square meters, with a thickness of 1 millimeter
expiry:
Unopened bags can be stored for up to 12 months in cool, dry, weatherproof conditions. Bags should be stored high off the ground.
Dryness and hardening:
It is not required after applying Deco wall putty. However, after application, spray water on the surface for two days, which will enhance the hydration of the cement and give better results.
Contraindications for use:
Do not install expansion joints and construction.
Product technical specifications:
Density: 1.8±0.1
Hardening time/viscosity: 2 hours at 25°C
Setting time: 1 to 3 hours primer
The final layer is 3 to 8 hours
Compressive strength: 28 days 14 MPa
Adhesion strength: 28 days 2.38 MPa
safety precautions:
This product is non-toxic but contains cement. Use good occupational health and safety practices to avoid direct contact.
Decorete recommends using dust masks, eye protection and wearing gloves when handling this product
To communicate:
For more information on this product or advice on application, please contact our Technical Consulting Department.
Warranty (Disclaimer):
@Decorete fully warrants its products when used and applied in strict accordance with printed instructions for mixing and applying the product. In any event, Decorete ®'s liability shall not exceed either the refund of the purchase price, or the replacement of the product purchased.
keep away from the reach of the children
