Epoxy final paint layer

Product Name : Epoxy final paint layer

Deco Resin 3309 - Top coating system. (3:1)

Product Description :

An ultra-clear epoxy topcoat designed specifically for counter tops, countertops and marble surfaces.

Deco Resin 3309 is suitable for almost all types of surfaces.

Deco Resin 3309 features the most advanced level of gloss, reflectivity, clarity and depth, and it maintains those optical qualities forever.

Properties:

• Works on almost any surface such as: wood - concrete - granite - copper - steel - stainless steel - laminate - cork - Formica - quartz - bamboo - Corian - ceramic tile - marble - porcelain - metal.
• Completely clear finishes will not yellow, fade or crack over time.
• Ensures durability and self-leveling; Self-levels at 3mm, creating an unobstructed view
• Scratch resistant and does not require maintenance
• 100% free of volatile organic compounds and compatible with environmental requirements.

Instructions for use:

working conditions:

The working room temperature should preferably be higher than 25 degrees Celsius. Maintain the temperature above 25°C for a full 72 hours until the epoxy cures/dries.

Application

Step 1: Measure the epoxy

Deco Resin 3309 is a two-part epoxy paint that is mixed at a 3-to-1 ratio.

Pour the measured amounts of hardener and resin into a new container. It is important that you use a new container for each batch you mix so that the next batch is not contaminated by leftover epoxy cured in the previous container.

Step 2: Mix the epoxy

Mix well to make sure the mixture is completely mixed.

Step 3: Paint on a coat of epoxy sealant

For porous materials such as wood, you will need to paint on a sealant coat of the same epoxy first to seal any pores in the surface. This prevents air bubbles from forming in the next layer. Not all surfaces require a sealant.

Step 4: Pour the epoxy layer

Pour the epoxy onto the surface working your way down along the area to a maximum thickness of 3mm at a time. The epoxy surface self-levels so there is no need to move it with any tools.

Step 5: Get rid of air bubbles using a torch or heat gun

Once you have finished pouring the epoxy (not a hair dryer), this process is the easiest step as it only takes 30 seconds to 1 minute. Keep the torch or heat gun a few inches from the surface and simply direct it back and forth until it covers the entire distance of the surface. The heat bursts any bubbles instantly.

Additional layers

Additional coats can usually be applied within 4 to 6 hours. If repainting is done within this time period, no sanding between coats will be necessary. If the previous layer has completely dried, it is recommended to sand lightly with 220 or 320 sandpaper to achieve a good bonding surface.

After sanding, you should wipe with a solvent such as alcohol, acetone or varnish thinner to remove any impurities from the surface.

Final finishing:

Epoxy dries within 12 hours. Leave it 72 hours before using the surface.

External applications:

Please note that although this product resists yellowing better than other epoxy products, it is not 100% UV resistant. Continuous exposure to outdoor UV rays over months or years will cause a loss of exterior gloss and gradual color changes.

Physical properties:

Packaging:

Deco Resin 3309 is available in 1.5kg and 20kg packages.

Storage:

Keep containers tightly closed when not in use and store in a cool, well-ventilated place away from sun and heat sources.

Health and safety:

Deco Resin 3309 is flammable, keep away from heat sources.

keep away from the reach of the children.

In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice. After contact with skin, wash immediately with plenty of clean water. Wear protective clothing, gloves, and protect eyes and face.

Cleaning:

All tools and equipment must be cleaned immediately after use with solvent 10. Hardened materials can only be removed mechanically .

To communicate:

For more information on this product or advice on application, please contact our Technical Consulting Department.

Warranty (Disclaimer):

@Decorete fully warrants its products when used and applied in strict accordance with printed instructions for mixing and applying the product. In any event, Decorete ®'s liability shall not exceed either the refund of the purchase price, or the replacement of the product purchased.

keep away from the reach of the children