Colorful straw
Product name : Colored straw
Deco Plaster 103 - Cementous render coat grade 3
Product Description:
Deco Plaster 103 is a colored plaster that is a dry coat pre-mixed plaster formulated with Portland cement.
Features:
- Embossed gypsum finish
- Weather resistant and highlights concrete and masonry decor
- Mixes easily with drinking water
- Easy to apply with trowel or spray
- Available in pre-mixed colors
- High durability
- Uniform, consistent colour
- Excellent link
Applications:
External or internal
- Formed or precast concrete
- Various construction works
- Stone
- Brick
- Cement gypsum, brown gypsum layer
Colors :
Deco Plaster 103 is available in a variety of colours. Special colors are also available subject to minimum order quantities and additional fees. For more details see the Decorete® color chart.
Surface preparation:
Cure/dry new concrete 28 days. Cracks, voids and holes on old concrete must be repaired before applying Deco Plaster 103.
The surface must be free of dirt, paint, coating, efflorescence and other contaminants.
For maximum bonding, apply Deco Bond 500 to smooth, dense or non-porous substrates before applying Deco Plaster 103.
Wet the substrate/primer not covered with Deco Bond 500 with drinking water before applying Deco Plaster 103.
Mixing instructions:
One 30kg bag of Deco Plaster 103 requires approximately 6 liters of drinking water to produce a suitable consistency.
Spray homogenization may require up to 8.0 liters of water.
In either mixture, the amount of water used should be uniform.
- Mix Deco Plaster 103 at slow speed
Rotary blender with rubber blades. High-speed or prolonged mixing will trap excess air.
- With the blender running, add 1/2 the required amount of water and slowly add the Deco Plaster 103 sachet.
- Add more water for a smooth, workable consistency. Continue mixing for 3 to 5 minutes.
- Stop the mixer and let the material set for more homogeneity for about 5 to 10 minutes.
- Start the mixer and mix for an additional 1 to 2 minutes. Add water as needed to achieve desired consistency.
Application method:
To produce uniform layers and color, Deco Plaster 103 should be applied by experienced workers using similar application techniques and tools. Lighter colors can be smoother and softer after finishing. Darker colors show the greatest color uniformity and intensity upon application.
Apply Deco Plaster 103 with sufficient pressure to ensure complete uniformity of the material and complete coverage of the substrate.
Apply an even layer of material to the surface, then immediately double it over with a second trowel. Allow Deco Plaster 103 to dry and harden slightly before installation.
Spraying:
Applicators must be experienced in using spray equipment designed specifically for cement-based materials.
Apply Deco Plaster 103 using a professional type high output plaster spray gun or air sprayer (hopper gun). Spray a thin, even layer of Deco Plaster 103 over the surface for uniform absorption. Hold the spray nozzle at a uniform distance at a 90 degree angle from the surface.
Immediately double up with a final coat before the first coat loses its surface shine. Spray on natural separation such as corners, control joints, expansion joints, roof lines, or wall and ceiling openings.
Processing:
Deco Plaster 103 should not be cured with water, only spray cured, or Deco Guard used as curing agent
Field samples:
Before starting work, create a field sample or mockup using all materials and systems that will be used in the actual construction process. Deco Plaster 103 must be mixed in complete quantities, using all job site procedures. Do not mix by hand. Obtain the owner or architect's approval of color, texture and coverage rates before starting work. Keep the model or field sample until the project is complete.
Coverage :
The following coverage rates are approximate and for estimation purposes only. Texture, thickness and application techniques will determine the amount of Deco Plaster 103 required.
One 30kg bag of Deco Plaster 103 will cover approximately 15 square metres.
Cleaning instructions:
Clean mixing and application equipment with water immediately after use.
Clean up spills, overspray, stains or excess surfaces before materials set.
warning:
Deco Plaster 103 is exposed For surface blooms, a suitable proofing system is recommended.
Furthermore, it is advisable to use a sealing layer; A wide range of products are available to meet different requirements. For more information, see our waterproof products.
Technical Specifications:
- Compressive Strength: (Air Handling) BS EN 1015-11: 1999 CS III
- Bending strength: (air curing) BS EN 1015-11: 1999 2.9 MPa
- Adhesive strength: (air cure) BS EN 1015-12: 2000 FP A
- Water absorption coefficient due to capillary tubes: (air curing) BS EN 1015-18 2002: WI
- Thermal conductivity:
- ASTM C177-10 .44 w/m3
- Compressive strength (7 days): (wet cure)
- BS EN 12190: 1999 > 23 MPa
- Compressive strength (28 days) (wet)
- BS EN 12190: 1999 > 29 MPa
- Bond strength by pullout: Wet Cure BS EN 1542: 1999 1.3 MPa
- Non-combustible: CAN4-ULC-S114-M80
Contraindications for use:
Do not apply Deco Plaster 103 to surfaces covered in freeze or frost. Do not apply Deco Plaster 103 when temperatures are below 5°C or above 35°C within 48 hours. Newly painted Deco Plaster 103 must be protected from rain. Do not use Deco Plaster 103 on horizontal surfaces subject to movement
Packaging:
Available in 30 kg bags.
expire:
One year when properly stored in a dry, moisture-free environment.
To communicate:
For more information on this product or advice on application, please contact our Technical Consulting Department.
Warranty (Disclaimer):
@Decorete fully warrants its products when used and applied in strict accordance with printed instructions for mixing and applying the product. In any event, Decorete ®'s liability shall not exceed either the refund of the purchase price, or the replacement of the product purchased.
keep away from the reach of the children