Wooden furniture recycling ideas
If you have old wooden furniture lying around, why not renovate it to give it a new life! You may also want to repaint your furniture for decorative reasons. In any case, you will have to think about sanding. For the first moment, sanding wooden furniture seems to be a simple matter. In addition, it is a delicate process that requires some key techniques. In fact, poor sanding can damage the wooden part. Here are some tips to help you sand your wooden furniture properly.
Basic requirements:
Before sanding, it is necessary to ventilate the room in which you will work. It is also necessary to cover your furniture properly to avoid its contact with dust. Do not forget to wear protective equipment such as: gloves, overalls, goggles, etc. Also keep a vacuum cleaner nearby to clean up wood debris and fine particles.
It will also be important to choose appropriate work tools.
It all depends on the nature of the wood to be sanded and the finishes to be stripped
In any case, you will need protective covers, wedges, an electric sander, a sanding sponge, and a damp cloth. Also consider purchasing sandpaper with the appropriate grit size. The higher the number, the finer the grain size. Choose according to the type of wood to be refinished: solid wood, waxed wood, painted or varnished wood, veneer, etc. It will also be necessary to provide an extension cord of 5 to 10 meters so that you can work easily, without the slightest restrictions.
sandy:
For sanding, you can choose between using a sander or doing it by hand. If you have to work on a surface with a layer of varnish or paint, consider doing a rough stripping first.
Sanding machine:
You can use an electric sander if it is a flat surface or a triangular pattern for an irregular surface. You just need to turn on your device and work over the entire surface. You just have to follow the direction of the wood to avoid damaging the aesthetic value of the furniture. Use an angle sander to get to uneven surfaces. For finishes, choose fine sandpaper.
Hand sanding:
If you want to do this by hand, you will need to use medium-grit sandpaper and a sanding block. Again, sand in the direction of the wood grain. Finally, sand with fine sandpaper.
Finishes:
To finish, use a slightly damp cloth to remove dust residue left by sanding. Then wipe with a soft, lint-free cloth.
Once you're done sanding, you can apply a coat of paint or even varnish, depending on your desired finish.
If you want to read articles similar to the article on ideas for recycling wooden furniture
Follow us on the Jaafar Shop blog
The best store for selling hand tools and tools in Jordan and Egypt
Shop with confidence from the largest hand tools store in Jordan. At Jaafar Shop, you will find electrical tools, hand tools, measuring tools, nail drills, paint screws, and painting supplies. Hand tools supplies and garden supplies. At Jaafar Shop, we provide you with everything you need, including screwdrivers, keys, pliers, and sets. the number. Browse our largest selection of maintenance tools and supplies:
اترك تعليق او سؤال